If you pitched up in the Seneca, what would happen to the blade angle?

If you pitched up in the Seneca, what would happen to the blade angle?

If you pitch up in a Seneca the speed IAS will decrease, because of the constant speed drive (in the propeller hub).

The propellers want to maintain the original RPM. Therefore the blades will go to a more fine blade setting.

What is the endurance of a Seneca?

What is the endurance of a Seneca?

We are missing the answer.

What are the longitudinal ridges on the stabilator of the Seneca for?

What are the longitudinal ridges on the stabilator of the Seneca for?

We are missing the answer.

How is the start generated in the Seneca?

How is the start generated in the Seneca?

The start is generated by the starter motor, which is powered by the battery.

Give a calculation to work out how far a Seneca could fly with a certain amount of fuel.

Give a calculation to work out how far a Seneca could fly with a certain amount of fuel.

Amount of fuel divided by 24 GPH (gallons of fuel per hour).

What's the purpose of the mirror looking at the nose-wheel on a Seneca?

What's the purpose of the mirror looking at the nose-wheel on a Seneca?

We are missing the answer.

Does the Seneca have a carb heat system?

Does the Seneca have a carb heat system?

No, Seneca has a fuel injection system therefore it does not have a carburator.

Do you get carb icing in the Seneca?

Do you get carb icing in the Seneca?

No, Seneca has a fuel injection system which doesn’t suffer from vapour icing.

If whilst taking off in a Seneca you lose the left engine what side do you want the crosswind to come from?

If whilst taking off in a Seneca you lose the left engine what side do you want the crosswind to come from?

Live side to oppose the yawing moment. In this case, the right side.

Why can't you feather the propellers below 800 RPM on the Seneca?

Why can't you feather the propellers below 800 RPM on the Seneca?

Because the feathering locks engage at 800 RPM.

You have reached the end of the test!Share LinkFinish